Skip to content
  • There are no suggestions because the search field is empty.

How do I power on XanderGlasses II?

Turn on the Processing Device first, then the captioning glasses.

XanderGlasses II has two parts that both need to be powered on: the Processing Device first, then the Captioning Glasses. Keep the Processing Device in the XG II case or your pocket, within 15–30 feet of the glasses, while captioning.

Step 1: Power on the Processing Device

  1. Remove the Processing Device from the XG II kit.
  2. Locate the power button on the right side of the device.
  3. Press and hold the power button until you see the “G” logo appear on the screen.
  4. Release the power button when you see the G logo.
  5. Wait about 25 seconds while the device boots the Xander processing system. The home screen will change to display the Xander logo.
  6. Swipe one finger up on the device display to open the Xander Caption screen.

Step 2: Power on the Captioning Glasses

  1. Remove any protective film from the outward-facing side of both lenses.
  2. Locate the Power Button on the right arm of the glasses — the button closer to your ear.
  3. Wear the glasses in a comfortable position.
  4. Press and hold the Power Button for 4 seconds, then release.
  5. Wait 5 seconds. An INMO logo will display, followed by a row of icons.
  6. Continue to wait an additional 5–15 seconds and the system will automatically begin captioning.
  7. Look at the bottom of the glasses display. It shows the battery percentage remaining in the glasses.

Captions hard to see? You can move the captions to the top, bottom, left, or right of your view instead of sliding the glasses down your nose.