How do I charge my XanderGlasses II?
Three rechargeable systems, each with its own charger.
Your XanderGlasses II has three rechargeable systems: the glasses battery, the Processing Device, and the wireless microphones. Each one has its own charger.
Glasses battery
The glasses battery has no charging port. It sits magnetically in the left arm of the glasses. To charge it, place it in the battery case with the logo and text facing up, then close the lid. It recharges in about 1 hour. A full battery lasts about 3 hours, and the bottom of the glasses display shows the percentage remaining. When it runs low, swap in the spare from the case.
Battery case
The battery case charges the glasses battery 4 times before it needs a recharge. To recharge the case, connect the included USB-C cable and charging brick to the port on the outside of the case, below the indicator light. A full charge from empty takes up to 90 minutes.
Open the lid to check the light next to the battery: flashing white means charging, and solid white means charged and ready.
Check the light on the outside of the case for its own charge level: solid red is 0-30%, solid orange is 30-60%, and solid white is 60-100%.
While the case is plugged in, flashing red, orange or white shows the charge level, and solid white means 100%.
Processing Device
The Processing Device runs about 15 hours on a full charge. Use the included USB-C cable and charger. It charges from 0% to 50% in 30 minutes, and from 0% to 100% in 90 minutes. It also works with Qi wireless chargers.
Wireless microphones
The microphones run up to 9 hours on a full charge. The first time you charge them, remove the thin blue stickers from the charging pins. Place the microphones in their charging case with the pins lined up, and they fully charge in 1.5 hours. With the case lid open, solid green means fully charged, solid orange means charging, and red or blue means not fully charged and not charging. The case recharges the microphones up to 3 times. Recharge the case with a USB-C cable in 1.5 hours.
Tip for a full day
Start the day with two fresh glasses batteries, a fully charged battery case, and a fully charged Processing Device. Your XanderGlasses II will caption for about 15 hours without plugging anything in.